Configure D-Link 502T for broadband. Set your network connection properties IP address 192.168.1.2 and gateway 192.168.1.1 and if gateway is pinging…
Step 1:-
Type http://192.168.1.1 on address bar of Internet Explorer.
Step 2:-
In User Name type “admin” and password “admin “, click OK.
The Modem page will be displayed
Step 3:-
Then click Home WAN
And set these values
PVC –
PVC0 For IPTV PVC1
VPI – 1
VCI -32 for IPTV 35
Virtual circuit- enable
Wan setting – PPPOE/PPPOA
User Name- Phone number /dslid@airtelbroadband.in
Password – CA Number/dslPWD
Connection Type- PPPOELLC
MRU- 1492
MTU- 1400
Obtain DNS Automatically – Enable
Default Route –Enable
NAT- Enable
IGMP- Disable
Step 4:- Apply
Step 5:-
Tools
System/Misc –>Save and Reboot
Above are the steps to configure D-Link 502T for broadband connectivity.
About Author
